Welcome to TONGLI Machinery

       Charcoal machine operation depends on the motor drive, and some charcoal power for several kilowatts, and some power for more than a dozen kilowatts, and some even reached tens of hundreds of kilowatts, is not the charcoal machine motor power greater processing of charcoal The quality of the better? I believe that many people have doubts about this, the following analysis of charcoal motor power is not the bigger the better.
       Charcoal machine motor power is not the bigger the better, the answer is no.
       The motor power of the charcoal machine is chosen according to the power required for the operation of the equipment. If this equipment requires only 5.5KW of motor and you have chosen 11KW, this is a little overkill. Although this does not overload the motor , But the cost is a bit high, running time and space loss will increase, wasted a lot of electricity.On the contrary, if you choose a smaller motor than 5.5KW, then the motor will run overload, the motor will heat, time Long motor is easy to burn, so charcoal motor power is not the bigger the better, but the motor power work in about 80% of the most appropriate.
      Understand the choice of charcoal motor power, the following we also talk about the daily maintenance of motor precautions.
      1. To regularly replace the oil, check the bearing heat and oil leakage.
      2. Note that the motor sound and smell, if there is Jiaohe, it shows the motor temperature is too high.If the noise, it shows the motor inside the problem, so whether there is Jiaoqi or noise, should immediately overhaul maintenance.
     3. Do not let the motor overload work, the purchase of equipment manufacturers will explain the limits of the equipment, the operator should always pay attention to the operation of the motor temperature rise.
     4. If it is a large charcoal production line, it is recommended to install a ammeter to monitor the motor load current when using a higher power motor. The load current of the motor can not exceed the current specified on the nameplate.
     The above is for everyone to analyze the size of the charcoal motor and the motor routine maintenance precautions.We have a professional technical department and perfect after-sales service department, if there is any doubt in the charcoal production, please feel free to contact us, we discuss progress together.

Contact details:
Telephone:+86-0371-60329939
Mobile:   +8613592505674
sarah@cncharcoalmachine.com
Website:http://www.charcoalequipment.com