Quick-wear Parts of Charcoal Machine - Propeller Maintenance

Screw propeller is the main and important parts of the charcoal machine. The bearing put great pressures on the propeller to squelch the sawdust into molding barrel. So, propeller is quick wearing but it can be repaired and reuse. Every eight hours need to be repaired with wear-resistant electrode. The propeller should be welded and grinded after using about five to seven days. And, nearly a month, it needs to be replaced with a new one.

In manufacturing process, charcoal machine can not mould or the rod steadily shed sometimes. The reason is screw propeller is wearing and it should be repaired.

Repair method is: Preheating the parts of propeller system which need surfacing. When the temperature reaches 200 degrees, weld it by wear-resisting electrode. Welding thickness is 1-2mm more than the desired thickness. Cool if after welding. When the temperature is below than 50 degrees, remove and grind it on silicon wheel. No collision and percussion on the repaired propeller and it should be stored carefully for using.

Charcoal machine manufacturer – Gongyi Tongli Machinery Factory supplies the spare parts of charcoal machine all year around. Our screw propeller models mainly include: 50mm, 60mm, 70mm and 80mm. What's more, we can customize the spare parts according to your needs, thus greatly improved the production capacity.

For more information, please view our website or contact us directly.

Homepage/ http://www.charcoalequipment.com
Alibaba website/  http://hntljx.en.alibaba.com/
E-mail/ tonglimachine5@cncharcoalmachine.com